March 29, 2024

Dragon Esdelsur

Home Sweet Home

Know the Four Forms of House Roofs

In the architecture of a house, the roof has an important role to keep the house from exposure to heat and rain. Another function is forming the exterior identity of the house itself. No wonder the roof contributes to strengthening the design of a building.

In building a roof, the thing to note is the construction. It must be ensured that the roof is in a sturdy condition and is resistant to wind or rain. Both the columns and supporting beams, roof truss, and cover material. The proper calculation will ensure that the roof can last for decades according to the age of the house. Therefore, you must consider getting the best chesterfield roofing services when installing or repairing your roof home.

Well, for those of you who are planning to build a new house, the selection of the shape of the roof must also be carefully considered. Do not let the roof pattern does not match the exterior and interior design of the house to be carried.

Gable roof

Also known as a gable roof, this is the safest and simplest form of the roof and fits in with a variety of home designs in the world. This roof resembles a horse saddle.

This roof is popular in many homes because the cost makes it relatively inexpensive and maintenance is quite easy. The advantage of this roof is that it is easier to detect when there is a leak, which usually occurs in a ridge which is the only connection on the roof. In addition, the gable has good absorption of radiation and heat for use in the tropics.

The minimum slope of the gable is 30 degrees. Rainwater can fall directly to the ground or made a gutter. While at the two ends of the building made walls as a substitute for the function of the horses.

Hip roof

Lima’s roof, shield, or hip roof, is a refinement of the shape of the gable roof which consists of two slanted trapezoidal fields. Two areas of the roof are a right triangle with a slope that is usually the same.

If you look closely, the shape of this roof looks more beautiful than a gable. But the cost of designing it is greater because it uses more frames. Another drawback is the risk of leaking which is quite risky, considering there are many connections when designing it.

But that does not mean the shield roof has no advantages. With an angle of 30 to 40 degrees on the roof, this shape is able to provide protection against the outer walls of the house from the heat of the sun and heavy rain.

The impact, the risk of damage to building structures can be minimized because it can bend the direction of the wind up with the sloping angle.

Roof rest

Some architects often call it the leaning roof. This roof model is commonly used in additional buildings such as the lobby, balcony, or terrace. With the development of architecture, the leaning roof is now also widely used in modern and minimalist style homes. This roof is usually combined with a gable.

The upper edge of the leaning roof is usually attached to a vertical wall, or also called the temple roof. The construction is half an easel or it can be replaced with walls. But not infrequently there is also new housing that uses this roof model as the main roof.

Flat roof

The last is a flat roof. This form is usually applied to contemporary modern houses in the form of a square or cube. This roof is usually made of concrete with no construction in the form of concrete blocks and concrete plates.

The flat pattern that extends towards the horizontal is usually used as a space for drying clothes or rooftop garden by some homeowners. Nevertheless, the shape of this roof can increase the potential for leakage because rainwater will be difficult to flow downward. But this can be tricked by designing the roof on a certain slope so that rainwater is not blocked.

Another important point to consider in designing this roof is to take into account the air circulation space below so that the room temperature is not too hot. Or you can also coat the concrete with no glass wool (heat absorbers made from fibers).